SE-PA-100
STEREO POWER AMPLIFIER SE-PA-100
FEATURES
– Analog HGBT audio amplifier with high gain and bandwidth: High Gain Bandwidth Technology
– Output stage with bipolar high-performance transistors - Very low output resistance
– Very high power bandwidth
– Very low noise
– Very low distortion and intermodulation
– Soft clipping
– Power buffer for all stages of voltage and current amplifications
– Regulated power supply for international AC mains voltage connection
– Aluminum housing with 10 mm wall thickness as a fully grounded block
– Convection cooling; no fans
– Loudspeaker connections with low transition resistances
![]() |
![]() |
|
TECHNICAL SPECIFICATIONS | ||
Rated power operated |
90 Watt RMS into 8 Ohms; both channels |
|
Load impedance |
8 - 16 Ohms (do not use 2 - 4 ohm loads) |
|
SOA |
current limiting and temperature protection |
|
Frequency response |
5 Hz - 130 KHz (- 3 dB); ref. 1 KHz, 0 dB |
|
Signal-to-noise ratio |
– 96 dB / 1W into 8 Ohms; 20 Hz - 30 KHz |
|
THD + noise |
0.006 % / 1 W into 8 Ohms; 20 Hz - 30 KHz |
|
Output impedance |
0.003 Ohms to 0.006 Ohms |
|
Damping factor |
2800 — 100 Hz / 1 Watt into 8 Ohms |
|
Input resistance |
3 KOhms balanced XLR |
|
Input sensitivity |
0.93 volts for rated power |
|
Voltage gain |
29.6 dB |
|
AC mains voltage |
100 - 240 VAC; + / - 10 %; 50 - 60 Hz |
|
Fuse |
100 - 110 VAC 8A slow |
|
Dimensions
|
height 31 cm, width 32 cm, depth 31 cm
|
|
SHOCK HAZARD: DO NOT OPEN! |